Fender Bass Amps |
 |
Fender Rumble 15 - Bass practice amp $229
15 watt bass amp with 1 x 8" speaker. Volume,
treble, mid, bass, 3-Band EQ, Delta Comp Adaptive Compression Circuitry,
Headphone Jack, Auxilliary Input for CD, Tape or Drum Machine,
Sealed Cabinet, Black Carpet Covering
|
Peavey Bass Combos
|
 |
Peavey Max Bass 158 - Bass practice amp $249
15 watts (rms) into 4 ohms, 8 inch speaker, Gain
control, Modern/Vintage voicing switch with patented TransTube® tube emulation
circuitry, Low, Mid, and High EQ controls, CD/Line-In jacks, Headphone jack
|
 |
Peavey Max Bass 112 - Bass amp $449
35 watts (rms) into 8 ohms, 12 inch speaker, Modern/Vintage
voicing switch with patented TransTube® tube emulation circuitry
Low, Mid, and High EQ controls, Post-EQ effects loop, CD Input, Tuned, ported
enclosure with exclusive dual HyperVent™ technology, Headphone jack |
 |
Peavey Max Bass 115 - Bass amp $549
60 watts (rms) into 8 ohms, 12 inch speaker, Modern/Vintage
voicing switch with patented TransTube® tube emulation circuitry
Low, Mid, and High EQ controls, High semi-parametric EQ, Post-EQ effects loop,
CD Input, Tuned, ported enclosure with exclusive dual HyperVent™ technology,
Headphone jack |
MarkBass
The new generation of Markbass amplifiers is truly innovative, and represents a new stage in the evolution of bass amplification. Our custom-designed digital power supply circuitry allows for impeccable bass frequency reproduction, and our incredible-sounding digital power amps (used in the SD800 head) take advantage of cutting-edge technology. All of our new heads give you a wide variety of sounds and unsurpassed tone in an extremely lightweight package. These days many manufacturers are claiming to make light amps... but Markbass stands in a league of its own. Our Little Mark II 500W head weighs under 6 pounds!
- All amps use top-quality dual-sided fibreglass PC boards with lined perforations for high-quality solder connections;
- All large surface-mount components are silicon-sealed to isolate vibrations;
- Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation;
- Integrated threaded posts for easy assembly/disassembly and added durability;
- Rigid 2 mm thick aluminium chassis for a long-lasting finish;
- All new Markbass amplifiers feature our special filters: the VLE (Vintage Loudspeaker Emulator) and the VPF (Variable Preshape Filter) Defining qualities of Markbass heads: They're powerful, they produce huge tone, they're incredibly dynamic... and they're super light!
About the Cabinets
All cabinets are made with high-grade multi-ply poplar and are glued, screwed and sealed internally with special compounds to ensure that all you hear is the sound of your bass. The Standard cabinets use only custom woofers that have been designed through collaboration between Markbass and B&C Speakers. We truly believe these are the best speakers in the world! The Standard series is notable for its incredible power-to-weight ratio and unparalleled performance. In all our new cabinets we use a custom 1” HF compression driver with horn. All of our combos and heads use ULTRA-LIGHTWEIGHT technologies. You will not find lighter bass amplification anywhere!
|
 |
MarkBass Little Mark Tube $1495 rrp
The Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp… or a mix of both! 2 inputs with separate gain controls: one 1/4” jack, and one combo jack that accepts either a XLR or 1/4” cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of equalization, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rear panel), and mute control (push-pull on the master knob).
500 w • Dual input/Dual Gain • Blendable Tube Preamp • 4 band EQ
|
 |
MarkBass Little Mark III $1295 rrp
Great sound, compact sound and light weight. The incredible international success of the Little Mark II has inspired this new, updated and upgraded version! The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you send to the mixer or recording unit. All this with the same compact size and weight of its famous predecessor!
2.9kg • 500 watts @ 4Ω • VLE & VPF Filters • Pre/Post EQ on DI • Line Vol. Electric bass plus XLR input for double bass pickups.
|
 |
MarkBass CMD102P Combo Bass amp $2395 rrp
500W @ 4 ohm / 400W @ 8 ohm combo bass amp with 2 x 10" speakers. Front Bass Port and piezo tweeter. A angled cabinet allowing for a layback monitor position as well as standard vertical position.
500w LMIII + 400W RMS 2 X 10" + PIEZO TWEETER |
 |
MarkBass Traveller 102P $1295 rrp
The Traveler 102P is one of the smallest and lightest 2x10" cabinets on the market. It can be used in either a vertical or horizontal position. Perfect for club gigs, this cab especially shines when added to a Traveler 151P for a punchy, full-range sound. All Markbass cabinets contain ultra-light neodymium speakers. This cabinet is available in both 4 ohm (T102P-4) and 8 ohm (T102P-8) versions. |
